Biofilm Formation and Genetic Diversity of Microbial Communities in Anaerobic Batch Reactor with Polylactide (PLA) Addition.

In this paper, an anaerobic digestion (AD) study was conducted on confectionery waste with granular polylactide (PLA) as a cell carrier. Digested sewage sludge (SS) served as the inoculum and buffering agent of systems. This article shows the results of the analyses of the key experimental properties of PLA, i.e., morphological characteristics of the microstructure, chemical composition and thermal stability of the biopolymer. The evaluation of quantitative and qualitative changes in the genetic diversity of bacterial communities, performed using the state-of-the-art next generation sequencing (NGS) technique, revealed that the material significantly enhanced bacterial proliferation; however, it does not change microbiome biodiversity, as also confirmed via statistical analysis. More intense microbial proliferation (compared to the control sample, without PLA and not digested, CW-control, CW-confectionery waste) may be indicative of the dual role of the biopolymer-support and medium. Actinobacteria (34.87%) were the most abundant cluster in the CW-control, while the most dominant cluster in digested samples was firmicutes: in the sample without the addition of the carrier (CW-dig.) it was 68.27%, and in the sample with the addition of the carrier (CW + PLA) it was only 26.45%, comparable to the control sample (CW-control)-19.45%. Interestingly, the number of proteobacteria decreased in the CW-dig. sample (17.47%), but increased in the CW + PLA sample (39.82%) compared to the CW-control sample (32.70%). The analysis of biofilm formation dynamics using the BioFlux microfluidic system shows a significantly faster growth of the biofilm surface area for the CW + PLA sample. This information was complemented by observations of the morphological characteristics of the microorganisms using fluorescence microscopy. The images of the CW + PLA sample showed carrier sections covered with microbial consortia.

Research on the Morphology of the Working Surfaces of Contacts Used in Starters in the Agro-Industrial Sector.

The operational suitability of electromagnetic starters equipped with experimental contacts has been substantiated within their use in electrical installations of the agro-industrial sector, which may be affected by the environments containing aggressive components. Tests on commutation wear resistance and investigations on arc erosion of the series-produced contact parts of such starters as PML-1100O4, PML-2100O4 (versions A and B; contact material-CpH-90, CpM-0,2 + M1, KMK-A10m, respectively) and PML-1100O4 starter with the experimental copper-based contact parts (Cu + Nb + Zr + Y2O3; Cu + Mo + MoO3 + C + Ni; Cu + Cr + TiB2 + Nb + C + Zr) have been conducted. The influence of energy parameters of a commutated circuit on the value of electro-erosion wear, the morphology of the working surfaces of contacts and contact resistance have been determined. Investigation results have been obtained by conducting a set of tests on electromagnetic starters at the experimental plant that simulates the operating conditions of the AC-3 application category. The impact of the electric arc of alternative current on the arc erosion of silver-based and copper-based contact materials have been determined by using a scanning electron microscope Cambridge Stereoscan S4-10 equipped with an attachment for X-ray spectroscopic analysis, Link System-290 and an X-ray microanalyzer Camebax SX-50 (CAMECA, Gennevilliers, France). A metallographic analysis of the contact surfaces has been conducted, which contributed to the determination of the patterns of erosive destruction of bridging contacts based on Ag and Cu. Evolution of the eroded morphology of contacts and the surface components of electrical contacts under the influence of an arc have been characterized. In addition, contact mass loss and the dependence of contact resistance have been studied. When manufacturing the experimental contacts, it is possible to abandon the use of silver, which is significantly cost saving, and not to use dangerous contact additives that are hazardous to the environment and people's health.

Polylactide (PLA) as a Cell Carrier in Mesophilic Anaerobic Digestion-A New Strategy in the Management of PLA.

The management of waste polylactide (PLA) in various solutions of thermophilic anaerobic digestion (AD) is problematic and often uneconomical. This paper proposes a different approach to the use of PLA in mesophilic AD, used more commonly on the industrial scale, which consists of assigning the function of a microbial carrier to the biopolymer. The study involved the testing of waste wafers and waste wafers and cheese in a co-substrate system, combined with digested sewage sludge. The experiment was conducted on a laboratory scale, in a batch bioreactor mode. They were used as test samples and as samples with the addition of a carrier: WF-control and WFC-control; WF + PLA and WFC + PLA. The main objective of the study was to verify the impact of PLA in the granular (PLAG) and powder (PLAP) forms on the stability and efficiency of the process. The results of the analysis of physicochemical properties of the carriers, including the critical thermal analysis by differential scanning calorimetry (DSC), as well as the amount of cellular biomass of Bacillus amyloliquefaciens obtained in a culture with the addition of the tested PLAG and PLAP, confirmed that PLA can be an effective cell carrier in mesophilic AD. The addition of PLAG produced better results for bacterial proliferation than the addition of powdered PLA. The highest level of dehydrogenase activity was maintained in the WFC + PLAG system. An increase in the volume of the methane produced for the samples digested with the PLA granules carrier was registered in the study. It went up by c.a. 26% for WF, from 356.11 m3 Mg-1 VS (WF-control) to 448.84 m3 Mg-1 VS (WF + PLAG), and for WFC, from 413.46 m3 Mg-1 VS, (WFC-control) to 519.98 m3 Mg-1 VS (WFC + PLAG).

Quantitative and Qualitative Changes in the Genetic Diversity of Bacterial Communities in Anaerobic Bioreactors with the Diatomaceous Earth/Peat Cell Carrier.

This paper analyses the impact of the diatomaceous earth/peat (DEP; 3:1) microbial carrier on changes in the bacterial microbiome and the development of biofilm in the anaerobic digestion (AD) of confectionery waste, combined with digested sewage sludge as inoculum. The physicochemical properties of the carrier material are presented, with particular focus on its morphological and dispersion characteristics, as well as adsorption and thermal properties. In this respect, the DEP system was found to be a suitable carrier for both mesophilic and thermophilic AD. The evaluation of quantitative and qualitative changes in the genetic diversity of bacterial communities, carried out using next-generation sequencing (NGS), showed that the material has a modifying effect on the bacterial microbiome. While Actinobacteria was the most abundant cluster in the WF-control sample (WF-waste wafers), Firmicutes was the dominant cluster in the digested samples without the carrier (WF-dig.; dig.-digested) and with the carrier (WF + DEP). The same was true for the count of Proteobacteria, which decreased twofold during biodegradation in favor of Synergistetes. The Syntrophomonas cluster was identified as the most abundant genus in the two samples, particularly in WF + DEP. This information was supplemented by observations of morphological features of microorganisms carried out using fluorescence microscopy. The biodegradation process itself had a significant impact on changes in the microbiome of samples taken from anaerobic bioreactors, reducing its biodiversity. As demonstrated by the results of this innovative method, namely the BioFlux microfluidic flow system, the decrease in the number of taxa in the digested samples and the addition of DEP contributed to the microbial adhesion in the microfluidic system and the formation of a stable biofilm.

Studies on Cement Pastes Exposed to Water and Solutions of Biological Waste.

The paper presents studies on the early stages of biological corrosion of ordinary Portland cements (OPC) subjected to the reactive media from the agricultural industry. For ten months, cement pastes of CEM I type with various chemical compositions were exposed to pig slurry, and water was used as a reference. The phase composition and structure of hydrating cement pastes were characterized by X-ray diffraction (XRD), thermal analysis (DTA/TG/DTG/EGA), and infrared spectroscopy (FT-IR). The mechanical strength of the cement pastes was examined. A 10 to 16% decrease in the mechanical strength of the samples subjected to pig slurry was observed. The results indicated the presence of thaumasite (C3S·CO2·SO3·15H2O) as a biological corrosion product, likely formed by the reaction of cement components with living matter resulting from the presence of bacteria in pig slurry. Apart from thaumasite, portlandite (Ca(OH)2)-the product of hydration-as well as ettringite (C3A·3CaSO4·32H2O) were also observed. The study showed the increase in the calcium carbonate (CaCO3) phase. The occurrence of unreacted phases of cement clinker, i.e., dicalcium silicate (C2S) and tricalcium aluminate (C3A), in the samples was confirmed. The presence of thaumasite phase and the exposure condition-dependent disappearance of CSH phase (calcium silicate hydrate), resulting from the hydration of the cements, were demonstrated.

Neural Reduction of Image Data in Order to Determine the Quality of Malting Barley.

Image analysis using neural modeling is one of the most dynamically developing methods employing artificial intelligence. The feature that caused such widespread use of this technique is mostly the ability of automatic generalization of scientific knowledge as well as the possibility of parallel analysis of the empirical data. A properly conducted learning process of artificial neural network (ANN) allows the classification of new, unknown data, which helps to increase the efficiency of the generated models in practice. Neural image analysis is a method that allows extracting information carried in the form of digital images. The paper focuses on the determination of imperfections such as contaminations and damages in the malting barley grains on the basis of information encoded in the graphic form represented by the digital photographs of kernels. This choice was dictated by the current state of knowledge regarding the classification of contamination that uses undesirable features of kernels to exclude them from use in the malting industry. Currently, a qualitative assessment of kernels is carried by malthouse-certified employees acting as experts. Contaminants are separated from a sample of malting barley manually, and the percentages of previously defined groups of contaminations are calculated. The analysis of the problem indicates a lack of effective methods of identifying the quality of barley kernels, such as the use of information technology. There are new possibilities of using modern methods of artificial intelligence (such as neural image analysis) for the determination of impurities in malting barley. However, there is the problem of effective compression of graphic data to a form acceptable for ANN simulators. The aim of the work is to develop an effective procedure of graphical data compression supporting the qualitative assessment of malting barley with the use of modern information technologies. Image analysis can be implemented into dedicated software.

A Comparison of Biomechanical Properties of Implant-Retained Overdenture Based on Precision Attachment Type.

This paper aims to compare, in vitro, the biomechanical properties of an overdenture retained by two bar-retained implants and an overdenture retained by two bar-retained implants with ball attachments. An edentulous mandible model was prepared for the study based on the FRASACO mold with two implants. In the first system, the "rider" type (PRECI-HORIX, CEKA) retention structure and the complete mandibular denture with the matrix were made. In the second system, the "rider" type retention suprastructure was also used. In the distal part, (CEKA) clips were placed symmetrically, and a complete mandibular denture, together with the matrix on the bar, and the clip patrices were made. A numerical model was developed for each system where all elements were positioned and related to geometric relations, as in reality. The FEA analysis (finite element analysis) was carried out for seven types of loads: with vertical forces of 20, 50, and 100 N and oblique forces of 20 and 50 N acting on individual teeth of the denture, namely central incisor, canine, and first molar. Displacements, stresses, and deformations within the systems were investigated. Maximum denture displacement in the first system was 0.7 mm. Maximum bar stress amounted to 27.528 MPa, and implant stress to 23.16 MPa. Maximum denture displacement in the second system was 0.6 mm. Maximum bar stress amounted to 578.6 MPa, that of clips was 136.99 MPa, and that of implants was 51.418 MPa. Clips cause smaller displacement of the overdenture when it is loaded but generate higher stress within the precision elements and implants compared to a denture retained only by a bar. Regardless of the shape of the precision element, small deformations occur that mainly affect the mucosa and the matrix.

The Effect of Liquid Slurry-Enhanced Corrosion on the Phase Composition of Selected Portland Cement Pastes.

This paper presents the scientific problem of the biological corrosion of Portland cements and its effects on the phase composition of cement pastes after the corrosion process in the environment of reactive media from the agricultural industry. Seven Portland cements produced from different cement plants exposed to pig slurry and water as a reference medium for a period of six weeks were tested. After the exposure process in both of the above-mentioned reaction environments, the hydrating cement pastes were characterized in terms of their phase composition using the XRD method and were also subjected to morphological observations and a chemical composition analysis with the application of SEM and EDS methods. The results of these studies indicate the presence of a biological corrosion product in the form of taumasite [C3S·CO2·SO3·15H2O], which is a phase formed as a result of the reaction of dead matter (cement paste) with living matter, caused by the presence of bacteria in pig slurry. In addition to taumasite, the tested samples also showed the presence of the hydration product of Portland cements named portlandite (Ca(OH)2). Moreover, unreacted phases of cement clinker, i.e., dicalcium silicate (C2S) and tricalcium aluminate (C3A), were detected. Based on microscopic observations and analyses of the chemical composition of selected areas of the samples, the presence of the taumasite phase and compact areas of pseudo-crystalline C-S-H phases with different morphological structures, derived from the hydration products of cements doped with ions originating from the corrosive environment, were confirmed.

A computer system supporting agricultural machinery and farm tractor purchase decisions.

Operational research, i.e. searching for optimal solutions in a situation of uncertainty and risk, can also be used to support decisions to purchase expensive agricultural machinery. Although Polish farmers receive subsidies from the EU, it does not mean they do not need to make well-thought-out purchases, because wrong purchase decisions will have long-term consequences while using machinery. The article presents the results of the IFOP - the system which has been available on the Internet for several years. It collects data on farming machinery and vehicles based on users' voluntary but subjective opinions. The authors of this article developed an original multi-criteria method of evaluating the quality of these specific products, which enabled them to make relevant rankings of brands. It is an algorithmic-heuristic method, which uses pairwise comparison tools to determine the significance ratios of the criteria. This article presents the results of the 1st and 2nd IFOP edition (Race Ranking), which included several dozen brands of tractors registered in Poland. More than fifty qualitative (Q) and non-qualitative (C) traits of farm tractors were taken into account. According to Polish farmers, Valtra - a Finnish brand of farm tractors, part of the AGCO concern, was the most versatile (Q = 4.39 and Q&C = 4.23). These tractors received the best opinions for their functionality, durability, ergonomics and safety.

The Use of Lignin as a Microbial Carrier in the Co-Digestion of Cheese and Wafer Waste.

The aim of the article was to present the effects of lignin grafted with polyvinylpyrrolidone (PVP) as a microbial carrier in anaerobic co-digestion (AcoD) of cheese (CE) and wafer waste (WF). Individual samples of waste cheese and wafers were also tested. The PVP modifier was used to improve the adhesive properties of the carrier surface. Lignin is a natural biopolymer which exhibits all the properties of a good carrier, including nontoxicity, biocompatibility, porosity, and thermal stability. Moreover, the analysis of the zeta potential of lignin and lignin combined with PVP showed their high electrokinetic stability within a wide pH range, that is, 4-11. The AcoD process was conducted under mesophilic conditions in a laboratory by means of anaerobic batch reactors. Monitoring with two standard parameters: pH and the VFA/TA ratio (volatile fatty acids-to-total alkalinity ratio) proved that the process was stable in all the samples tested. The high share of N-NH4+ in TKN (total Kjeldahl nitrogen), which exceeded 90% for WF+CE and CE at the last phases of the process, proved the effective conversion of nitrogen forms. The microbiological analyses showed that eubacteria proliferated intensively and the dehydrogenase activity increased in the samples containing the carrier, especially in the system with two co-substrates (WF+CE/lignin) and in the waste cheese sample (CE/lignin). The biogas production increased from 1102.00 m3 Mg-1 VS (volatile solids) to 1257.38 m3 Mg-1 VS in the WF+CE/lignin sample, and from 881.26 m3 Mg-1 VS to 989.65 m3 Mg-1 VS in the CE/lignin sample. The research results showed that the cell immobilization on lignin had very positive effect on the anaerobic digestion process.

Neural Classification of Compost Maturity by Means of the Self-Organising Feature Map Artificial Neural Network and Learning Vector Quantization Algorithm.

Self-Organising Feature Map (SOFM) neural models and the Learning Vector Quantization (LVQ) algorithm were used to produce a classifier identifying the quality classes of compost, according to the degree of its maturation within a period of time recorded in digital images. Digital images of compost at different stages of maturation were taken in a laboratory. They were used to generate an SOFM neural topological map with centres of concentration of the classified cases. The radial neurons on the map were adequately labelled to represent five suggested quality classes describing the degree of maturation of the composted organic matter. This enabled the creation of a neural separator classifying the degree of compost maturation based on easily accessible graphic information encoded in the digital images. The research resulted in the development of original software for quick and easy assessment of compost maturity. The generated SOFM neural model was the kernel of the constructed IT system.

Use of Confectionery Waste in Biogas Production by the Anaerobic Digestion Process.

It was the objective of this study to verify the efficiency and stability of anaerobic digestion (AD) for selected confectionery waste, including chocolate bars (CB), wafers (W), and filled wafers (FW), by inoculation with digested cattle slurry and maize silage pulp. Information in the literature on biogas yield for these materials and on their usefulness as substrate in biogas plants remains to be scarce. Owing to its chemical structure, including the significant content of carbon-rich carbohydrates and fat, the confectionery waste has a high biomethane potential. An analysis of the AD process indicates differences in the fluctuations of the pH values of three test samples. In comparison with W and FW, CB tended to show slightly more reduced pH values in the first step of the process; moreover an increase in the content of volatile fatty acids (VFA) was recorded. In the case of FW, the biogas production process showed the highest stability. Differences in the decomposition dynamics for the three types of test waste were accounted for by their different carbohydrate contents and also different biodegradabilities of specific compounds. The highest efficiency of the AD process was obtained for the filled wafers, where the biogas volumes, including methane, were 684.79 m³ Mg-1 VS and 506.32 m³ Mg-1 VS, respectively. A comparable volume of biogas (673.48 m³ Mg-1 VS) and a lower volume of methane (407.46 m³ Mg-1 VS) were obtained for chocolate bars. The lowest volumes among the three test material types, i.e., 496.78 m³ Mg-1 VS (biogas) and 317.42 m³ Mg-1 VS (methane), were obtained for wafers. This article also proposes a method of estimation of the biochemical methane potential (theoretical BMP) based on the chemical equations of degradation of sugar, fats, and proteins and known biochemical composition (expressed in grams).